BJHTN - IDEAL TYPE M-WHITE
- MSDS: BJHTN
- Manufacturer: IDEAL STENCIL MACHINE AND TAPE CO
- Product Name: IDEAL TYPE M-WHITE
- National Stock Number: 7510-00-224-6732
Product Identification
Product ID:IDEAL TYPE M-WHITE
MSDS Date:12/19/1988
FSC:7510
NIIN:00-224-6732
MSDS Number: BJHTN
Responsible Party
BELLEVILLE, IL 62222
Emergency Phone: (618) 233-0162
Info Phone: (618) 233-0162
Preparer: S. BOYD
Cage: 30133
Contractor
Telephone: 618-233-0162
Cage: 30133
Ingredients
BENZIN, NAPHTHA, MINERAL SPIRITS
CAS: 8030-30-6
RTECS: DE3030000
Fraction By Weight: 20%
OSHA PEL 500 PPM
ACGIH TLV: 300 PPM
METHYL ALCOHOL (METHANOL) (SARA III)
CAS: 67-56-1
RTECS: PC1400000
Fraction By Weight: <1%
OSHA PEL S,200PPM/250STEL
ACGIH TLV: S,200PPM/250STEL; 93
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ISOPARAFFINIC HYDROCARBONS (NAPHTHA PETROLEUM),
CAS: 64742-48-9
Fraction By Weight: 20%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
COBALT (SARA III)
CAS: 7440-48-4
RTECS: GF8750000
Fraction By Weight: <1%
OSHA PEL 0.1 MG/M3;AS CO
ACGIH TLV: 0.05 MG/M3;DUST 9293
ZIRCONIUM
CAS: 7440-67-7
RTECS: ZH7070000
Fraction By Weight: <1%
OSHA PEL 5 MG/M3/10 STEL
ACGIH TLV: 5 MG/M3/10 STEL;9192
400 G/L
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: SEVERE IRRITATION, REDNESS,
TEARING, BLURRED VISION. SKIN: IRRITATION, DEFATTING, DERMATITIS.
INHALATION: NASAL/RESPIRATION IRRITATION, DIZZINESS, WEAKNESS,
FATIGUE, HEADACHE, POSSIBLE UNCONSCIO USNESS/ASPHYXIATION.
INGESTION: GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING/DIARRHEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: ASPIRATION OF MATERIAL INTO THE
LUNGS CAUSE CHEMICAL PNEUMONITIS WHICH CAN BE FATAL. SKIN:
PROLONGED/REPEATED CONTACT CAN CAUSE MODERATE IRRITATION,
DEFATTING, DERMATITIS.
Medical Cond Aggravated by Exposure:DERMATITIS
First Aid
First Aid:EYES: FLUSH W/LARGE AMOUNTS OF WATER, GET MED ATT. SKIN:
THOROUGHLY WASH EXPOSED AREA W/SOAP & WATER. REMOVE/LAUNDER
CONTAMINATED CLOTHING BEFORE RE-USE. INGESTION: DON'T INDUCE
VOMITING, KEEP PERSON WARM, QUIET/GET MED ATTN. INHALATION: IF
AFFECTED, REMOVE INDIVIDUAL TO FRESH AIR. IF BREATHING IS
DIFFICULT, ADMINISTER OXYGEN. IF BREATHING HAS STOPPED GIVE
ARTIFICIAL RESPIRATION. GET MED ATT.
Fire Fighting
Flash Point Method:TCC
Flash Point:50F
Extinguishing Media:REGULAR FOAM, CO2 OR DRY CHEMICAL
Fire Fighting Procedures:A WATER STREAM MAY SPREAD BURNING LIQUID.
WATER SHOULD BE USED AS COOLING SPRAY.
Unusual Fire/Explosion Hazard:VAPORS ARE >AIR/MAY TRAVEL ALONG THE
GROUND/MOVED BY VENTILATION & IGNITED BY PILOT LIGHTS & OTHER
IGNITION SOURCES DISTANT FROM POINT OF HANDLING.
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES, PROVIDE GOOD
VENTILATION, DIKE SPILL W/ABSORBENT MATRIAL SUCH AS SAWDUST OR
ABSORBENT CLAY. MIX ABSORBENT W/SPILLED LIQUID.
Handling
Handling and Storage Precautions:USE IN COOL, WELL VENTILATED AREAS.
KEEP ROLLERS COVERED & CONTAINERS CLOSED WHEN NOT IN USE. KEEP AWAY
FROM FOOD & FEED PRODUCTS.
Other Precautions:AVOID BREATHING OF SPRAY INK. DON'T STORE NEAR SOURCE
OF HEAT, OPEN FLAMES OR OTHER IGNITION SOURCES. CONTAINERS OF THIS
MATERIAL MAY BE HAZARDOUS WHEN EMPTIED. SINCE EMPTIED CONTAINERS
RETAIN PRODUCT RESIDUES (VAPOR/LIQUID/SOLIDS).
Exposure Controls
Respiratory Protection:IS RECOMMENDED WHEN PRODUCT IS USED IN POORLY
VENTILATED OR CONFINED SPACES. USE NIOSH APPROVED RESPIRATOR WHEN
NEEDED.
Ventilation:PROVIDE MECHANICAL/LOCAL EXHAUST VENTILATION TO KEEP
Eye Protection:SAFETY GLASSES W/SIDE SHIELD
Work Hygienic Practices:WASH SPILLS OR WASHES W/SOAP & WATER AT ONCE.
Supplemental Safety and Health
WT/GAL: 9.7
Chemical Properties
Boiling Pt:B.P. Text:240-520F
Vapor Density:>AIR
Spec Gravity:1.17
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:WHITE LIQUID
Percent Volatiles by Volume:85%
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENT
Stability Condition to Avoid:IGNITION SOURCES, HEAT, OPEN FLAMES
Disposal
Waste Disposal Methods:COLLECT ABSORBED MATERIAL IN METAL CONTAINER.
ALLOW ABSORBED MATERIAL TO DRY IN OPEN AIR OUTSIDE. DISPOSE OF IN
ACCORDANCE W/FEDERAL, STATE, & LOCAL LAWS. FLAMMABLE LIQUID.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.